Forside Styling Layout: Infobox

Linn DS-I tekniske specifikationer

Link til nyheden om Linn Majik DS-I


 



 


Key features



  • High performance integrated Linn DS player, pre-amplifier and power amplifier
  • 11 inputs (6 digital and 5 analogue) for connection and up-sampling of additional sources
  • Phono input configurable to moving magnet or line level (moving coil upgrade also available)
  • AUX input on front for easy connection of portable MP3 players etc.
  • Dynamik power supply and 2 channels of 100 W Chakra amplification
  • Plays FLAC, ALAC, WAV, AIFF, AAC and MP3 audio formats with up to 24-bit / 192 kHz native sample rate
  • Compatible with UPnP? media servers and UPnP? AV 1.0 control points
  • High quality binding posts for flexible loudspeaker connection options, plus headphone socket on front.

 


 


 


Specifications



  • Date of introduction October 2009
  • Type Integrated DS player, pre-amplifier and power amplifier
  • Dimensions (H) 80 mm x (W) 381 mm x (D) 355 mm
    (without feet) (H) 3.15 inches x (W) 15 inches x (D) 14 inches
  • Weight 4.9 kg / 10.78 lb
  • Mains supply voltage 100 ? 120 V ac (±10%) 50 ? 60 Hz
    (auto ranging) 200 ? 240 V ac (±10%) 50 ? 60 Hz
  • Fuse 250 V, T1.6 A (not user replaceable)
  • Power consumption
    standby < 20 W
    maximum continuous 400 W
  • Supported file types FLAC, ALAC, WAV, AIFF, AAC, MP3
  • Audio sample rates 7.35 k, 8 k, 11.025 k, 12 k, 14.7 k, 16 k, 22.05 k, 24 k,
    29.4 k, 32 k, 44.1 k, 48 k, 88.2 k, 96 k, 176.4 k, 192 k
  • Word depths 16 ? 24 bits
  • Control protocol Compatible with UPnP? media servers,
    UPnP? AV 1.0 control points
    Back Panel Connectors
  • Analog audio
    Line inputs (1 to 4) RCA phono (Input 4 MM/Line)
    Aux input (front) 3.5 mm stereo jack
    Tape/Zone output RCA phono (pre-volume control)
    Line out (L+R) RCA phono (post-volume control)
    Headphone (front) 3.5 mm stereo jack (post-volume control)
  • Digital audio
    SPDIF In RCA phono
    Optical In TOSLINK (JIS F05)
    SPDIF Out RCA phono (pre-volume)
    Optical Out TOSLINK (pre-volume) (JIS F05)
  • Speaker outputs 4 mm banana/binding post/spade
  • Control
    Ethernet 100Base-T RJ45
    RS232 (1 & 3) RJ11
    IR Flasher 3.5 mm jack (x2)
    Input Electrical
  • Analog line inputs
    Max input voltage 6 V RMS, 8.4 V peak
    Input impedance 10 kÙ
  • AUX input
    Max input voltage 3 V RMS, 4.2 V peak
    Input impedance 100 kÙ
  • MM Phono input*
    Max input voltage 50 mV RMS, 70 mV peak
    Input impedance 47 kÙ 68 pF
    MM Gain +40 dB (x100) @ 1kHz
  • SPDIF digital input
    Max input voltage 3 V peak
    Input impedance 75 Ù

 


 


 


Output Electrical



  • Analog line outputs
    Max output voltage 6 V RMS, 8.4 V peak, +15.6 dBv
    Output impedance 300 Ù
    DC offset voltage < 5 mV
  • DAC output
    Output voltage 0 dBFS = 2 V RMS, + 6 dBv
    Sample rate Up-sampled to 358.2 kHz for 44.1/88.2 kHz
    Up-sampled to 384 kHz for 48/96 kHz
  • Tape/Zone output
    Max output voltage 6 V RMS, 8.4 V peak, +15.6 dBv
    Output impedance 300 Ù
    DC offset voltage < 5 mV
  • Headphones output
    Max output voltage 6 V RMS, 8.4 V peak, +15.6 dBv
    Output impedance 11 Ù
    DC offset voltage < 5 mV
  • SPDIF digital output
    Max output voltage 500 mV peak
    Output impedance 75 Ù
    Audio Performance
  • Line inputs
    THD+N < 0.002 %
    Dynamik range 110 dB
    Signal to noise ratio 117 dB
    Channel separation > 117 dB
    Frequency response 2.5 Hz – 120 kHz (-3 dB)
  • Pre-amplifier
    MM RIAA Tracking ±0.2 dB
    Gain range – 80 dB to + 20 dB
    Gain resolution 1 dB
    Unity gain volume 0 dB = vol. 80
    Line input scaling 0 dBFS = 2.5 V RMS
    Line output scaling 0 dBFS = 1 V RMS
  • Power amplifier
    Power output 90 W RMS per channel into 4 Ù
    THD+N < 0.015% (1 kHz, 1 W RMS into 4 Ù)
    Dynamik range > 120 dB
    Signal to noise ratio > 115 dB
    Channel balance < ± 0.2 dB
    Channel separation > 75 dB (1 kHz into 4 Ù)
    Frequency response 6 Hz – 25 kHz (-3 dB into 4 Ù)
    Damping factor > 170
    Speaker output voltage 28.8 V peak
    Gain 28.6 dB (relative to line out)
    Load tolerance Unconditionally stable into all loudspeaker loads
    Signal level for clipping 755 mV RMS, -2.5 dBv

* Input 4 configured as MM by default – speak to Scala Hifi to change to line level or upgrade to MC


 


Pris kr. 23.000,-


 


Link til nyheden om Linn Majik DS-I

Annonce